ioLogik E2214

Active Ethernet I/O with 6 digital inputs and 6 relay outputs

	Datasheet Manual Drivers & Software
Larger image

Features

Specifications

Ordering Information

Features and Benefits

6 DIs supporting PNP, NPN, and dry contact
6 Form A relay outputs (Normal Open)
Relay specifications: 5 A @ 250 VAC, 5 A @ 30 VDC
Instant event messaging by TCP/UDP/email/SNMP-trap
DI and Relay counter saved when the power is shut off
PC-based configuration utility and web console
Power On default relay status setting with sequence
Easy-to-use Click&Go™ Logic for local output control
Windows/WinCE VB/VC.NET and Linux C APIs
I/O control over Modbus/TCP and SNMP protocol

Introduction

Remote Ethernet Relay Control
The ioLogik E2214 is a stand-alone Active Ethernet I/O product with 6 digital inputs and 6 relay outputs. The DIN-Rail mountable E2214 can be connected to digital switches, alarm lights, buzzers, and warning sirens over Ethernet and IP-based networks. The ioLogik E2214 also records the built-in relay output usage counter. Even when a sudden power failure is encountered, the ioLogik E2214 will still be able to record the relay output usage counter in its internal memory before the power shuts down completely.

More info >>

• LAN:
Ethernet	1 x 10/100 Mbps, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

• Serial:
Interface	RS-485-2w: Data+, Data-, GND
Serial Line Protection	15 KV ESD for all signals

• Serial Communication Parameters:
Baudrate	1200 to 115200 bps
Data Bits	8
Stop Bits	1
Parity	None
Flow Control	None
Protocols	Modbus/RTU

• Digital Input:
Channels	6, source/sink selectable
Sensor Type	NPN, PNP, and Dry contact
I/O Mode	DI or Event Counter (up to 900 Hz)
Dry Contact	• Logic 0: short to GND • Logic 1: open
Wet Contact	(For Source Type) • Logic 0: 0 to 3 VDC • Logic 1: 10 to 30 VDC (DI COM to DI)
Common Type	6 points per COM
Isolation	3K VDC or 2K Vrms
Counter/Frequency	900 Hz, power off storage
Digital Filtering Time Interval	Software selectable
Over-voltage Protection	36 VDC
Poweroff Counter Memory	48 bytes
Relay Counter Saving	Yes

• Digital Output:
Channels	6 Form A (N.O.) relay outputs, 5A
Contact Rating	5 A @ 30 VDC, 5 A @ 250 VAC, 5 A @ 110 VAC
Inductance Load	2 A
Resistance Load	5 A
Breakdown Voltage	500 VAC
Relay On/Off Time	10 ms, 5 ms (Max.)
Initial Insulation Resistance	1G min. @ 500 VDC
Expected Life	100,000 times (Typical)
Initial Contact Resistance	30 milli-ohms (Max.)
Pulse Output	0.3 Hz at rated load
Isolation	3K VDC or 2K Vrms

• Physical Characteristics:
Wiring	I/O cable max. 14AWG

• Environmental Limits:
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

• Power Requirements:
Power Consumption	282 mA typical @ 24 VDC
Power Input	24 VDC nominal, 12 to 48 VDC

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC 61000-4, IEC 61000-6
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6