ioLogik E2260

Active Ethernet I/O with 6 RTD inputs and 4 digital outputs

	Datasheet Manual Drivers & Software
Larger image

Features

Specifications

Ordering Information

Features and Benefits

Supports PT, JPT, Ni RTD sensor types and resistors
Adjustable RTD sampling rate
Instant event messaging by TCP/UDP/email/SNMP-trap
PC-based configuration utility and web console
Easy-to-use Click&Go™ Logic for local output control
Windows/WinCE VB/VC.NET and Linux C APIs
I/O control over Modbus/TCP and SNMP protocol
NIST traceable calibration››

Introduction

Bring Intelligence to Temperature Measurement

The ioLogik E2260 brings intelligence to temperature sensors. It comes equipped with virtual channels that are designed to calculate the average value of each channel and the difference between two channels. And it does all this without a controller or PC.

Compatible with Popular RTD Temperature Sensors

The ioLogik E2260 offers PT100, PT1000, JPT, and Ni sensor types and a resistor of up to 2.2 kilo-ohms, and supports using your own resistance sensor, such as PTC or NTC types for your HVAC applications.

More info >>

• LAN:
Ethernet	1 x 10/100 Mbps, RJ45
Protection	1.5 KV magnetic isolation
Protocols	Modbus/TCP, TCP/IP, UDP, DHCP, Bootp, SNMP (MIB for I/O and Network), HTTP, CGI, SNTP

• Serial:
Interface	RS-485-2w: Data+, Data-, GND
Serial Line Protection	15 KV ESD for all signals

• Serial Communication Parameters:
Baudrate	1200 to 115200 bps
Data Bits	8
Stop Bits	1
Parity	None
Flow Control	None
Protocols	Modbus/RTU

• RTD:
Channels	6
Sampling Rate	12 samples/sec (all channels)
Resolution	0.1°C or 0.1 ohm
Accuracy	±0.1% FSR @ 25°C ±0.3% FSR @ -10 and 60°C
Input Impedence	625K ohms (min.)
Input Type	Pt, JPt, Ni, RTD sensor, resistor

• Digital Output:
Channels	4, sink, 36 VDC, 200 mA
I/O Mode	DO or Pulse Output
Optical Isolation Protection	3K VDC or 2K Vrms
Output Frequency	100 Hz
Pulse Wave Width	10 ms/100 Hz
Over-voltage Protection	45 VDC
Over-current Limit	750 mA
Over-temperature Shutdown	175°C
Isolation	3K VDC or 2K Vrms

• Physical Characteristics:
Wiring	I/O cable max. 14AWG

• Environmental Limits:
Operating Temperature	-10 to 60°C (14 to 140°F)
Storage Temperature	-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity	5 to 95% (non-condensing)

• Power Requirements:
Power Consumption	282 mA typical @ 24 VDC
Power Input	24 VDC nominal, 12 to 48 VDC

• Agency Approvals:
EMI	FCC Part 15, CISPR (EN55022) class A
EMS	IEC 61000-4, IEC 61000-6
Safety	UL508
Shock	IEC 60068-2-27
Freefall	IEC 60068-2-32
Vibration	IEC 60068-2-6